169CC Outboard Motor Marine Engine with Water-cooling CDI Tiller Control System

Specifications:Brand: HANGKAIDisplacement: 169CCGear ratio: 2.08(27:13)Cylinder: 2Max.Output(kw): 8.8Max.speed(r/min): 4500-5500Gear Positions: F-N-RPacking size: 120×70.5×37.5cmIgnition System: CDICooling System: Water-coolingControl System: Tiller controlStarting System: Manual startControl System: 93 gasolineN.W./G.W.(kgs): 27/31Bore x Stroke(mm): 50x43Recommended Propeller range: 3 -9″1/4”x8″Recommended Lubricant: 2 Stroke Lubricating oilMixing ratio: Fuel:oil=50:1Trim and tilt system: Manual TiltOverall LxWxH(cm): 78.3×33.2x104Standard fuel tank capacity: 24LPlease Must Read before usingFirstly, Fill the gear oil (open gear box lid and fill it)Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 timesThirdly, Fill engine oil don’t exceed the head of the patternForthly, turn the throttle to the start up and turn the accelerator gets up to 50percentThen, Rapidly pull the starter lineAfter the motor start, please turn the throttle to running stateThen, it can be operated nowCylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motorDon’t do the following will avoid cylinder Scoring1. Start the motor in the water2. Use the motor when it stop cyling waterEven if you want test the motor, it should be done in the riverWhen there is no water coming out from the motor,please stop using it immediately,then check the impeller of Water pump or check if the water outlet has been blocked